0
Special Offer: Use code LABOR4 in cart
$19.00
Model number: CDP-016
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
Deliver a clean, architectural wall-wash without millwork. This crown-molding style aluminum profile mounts to the wall or ceiling surface and hides the LED tape behind a deep, curved reflector, producing a soft, continuous glow—“see the light, not the source.” Built from thick, anodized aluminum for excellent heat dissipation and longevity, the channel ships with a milky PC diffuser that evens output and eliminates glare. Four geometry options (A/B/C/D) let you match reveal depth and beam character; wide trays in A/B/C accept up to 21 mm tape for higher lumen builds, while D suits slim 10 mm strips. Field-cuttable lengths and screw-on installation make it contractor-friendly for residential or commercial coves, ceiling perimeters, and baseboard accents. LED strip and power supply are not included.
To get recommended LED Strip lighting, CLICK HERE
Specifications:
| Feature | Detail |
|---|---|
| Material | Extruded aluminum housing + milky PC diffuser |
| Finish | Anodized matte silver (paintable if desired) |
| Mounting Type | Surface-mounted, screw-on (trimless flange allows seam filling if required) |
| Styles | 4 options: A • B • C • D |
| Profile Dimensions (W × H) | A: 110 × 68 mm (4.33 × 2.70 in) • B: 86 × 56 mm (3.39 × 2.20 in) • C: 86 × 56 mm (3.40 × 2.20 in) • D: 70 × 69 mm (2.75 × 2.71 in) |
| Max LED Strip Width | A/B/C: 21 mm (0.83 in) • D: 10 mm (0.41 in) |
| Light Effect | Indirect wall/ceiling wash; source concealed |
| Length | 1.6 ft (0.5 m), 3.3 ft (1 m), 6.6 ft (2 m) — field-cuttable |
| Diffuser Type | Snap-in polycarbonate, milky (dot-softening) |
| LED Compatibility | 12 V / 24 V white or RGB/CCT tapes (LED strip not included) |
| Typical Applications | Ceiling coves, crown perimeters, baseboards, hotel corridors, retail accents, home theaters |
Installation Guide:
Plan & measure – Choose style (A/B/C/D) to suit your reveal and LED width. Lay out runs and locate feed points and driver space.
Mount the profile – Mark the line, pre-drill, and screw the aluminum body to framing or to drywall with anchors. (Optional: skim/feather over the trimless flange for a seamless edge.)
Prepare wiring – Pull low-voltage leads to each run. Bench-test the LED tape and driver before install.
Apply LED tape – Clean the tray, remove adhesive liner, and press the strip into the channel (A/B/C ≤ 21 mm; D ≤ 10 mm). Observe polarity and avoid sharp bends.
Close the diffuser – Snap in the milky PC cover along the run; add end treatment as needed.
Power & test – Connect to a suitable 12/24 V driver/dimmer, verify even illumination, then finish any seam work and clean down.
Original price was: $34.99.$19.00Current price is: $19.00.
Original price was: $34.99.$19.00Current price is: $19.00.
Original price was: $34.99.$19.00Current price is: $19.00.
Original price was: $24.99.$19.00Current price is: $19.00.
Original price was: $19.00.$9.00Current price is: $9.00.
Original price was: $34.99.$19.00Current price is: $19.00.
Original price was: $19.00.$9.00Current price is: $9.00.
Original price was: $29.99.$19.99Current price is: $19.99.
Original price was: $39.99.$29.99Current price is: $29.99.
Original price was: $29.99.$19.99Current price is: $19.99.
Original price was: $39.99.$29.99Current price is: $29.99.
Original price was: $49.99.$39.99Current price is: $39.99.
Original price was: $34.99.$19.00Current price is: $19.00.
Original price was: $29.99.$19.99Current price is: $19.99.
Original price was: $29.99.$19.99Current price is: $19.99.
Original price was: $19.00.$9.00Current price is: $9.00.
Original price was: $39.99.$29.99Current price is: $29.99.
Original price was: $34.99.$19.00Current price is: $19.00.
Sophie Carter –
I used this aluminum profile for my living room ceiling, and it looks incredible. The light washes evenly across the wall and creates a soft, elegant glow. It instantly made my space feel more modern and cozy.
Jackson Reed –
These crown molding channels completely upgraded my home! The design blends right into the drywall, and once the LEDs are installed, the light looks seamless and professional. Perfect for anyone who wants a clean architectural finish.
Trevor Kingsmore –
Installed this for a client’s living room and the results look premium. The profile disappears into the ceiling, leaving only a beautiful wash of light. Very high-end feel. Excellent for modern interior builds.
Garrett Halbrook –
The build quality is superb. The curved shape produces a beautiful gradient on the wall, and the perforated edges help it bond perfectly with gypsum. Great for luxury ceiling designs and baseboard uplighting.
Dalton Ferrow –
Used this for a floating ceiling detail and it came out beautifully. The lighting is subtle but impactful, and the gypsum flange blends perfectly with the ceiling finish. One of the best profiles I’ve worked with.
Ava Thompson –
This was such a great find. I installed it along the top edge of my bedroom wall, and it gives off the most beautiful indirect light. It’s subtle but makes a huge difference in the room’s atmosphere.
Caleb Anderson –
Super impressed with the quality! The aluminum feels solid, and the gypsum edge makes it easy to integrate into the wall. The final result looks like high-end designer lighting.
Cole Rambridge –
Really impressed with how clean and modern this profile looks once finished. The light output is consistent and the profile installs flush without any visible seams. Excellent choice for designers and contractors.
Lily Martinez –
I used this for baseboard lighting in my hallway, and it looks amazing. The glow is soft and diffused, and it’s perfect for creating that modern “floating wall” effect.
Ethan Walker –
These channels were easy to work with and look fantastic once installed. I love how the light reflects off the wall without any visible fixtures—just a clean, continuous glow.
Zoe Jenkins –
I’m so happy with how my living room turned out after installing these. They make the ceiling look taller and give the whole space a warm, elegant feel. Definitely worth every penny.
Logan Murphy –
This molding channel gives such a refined look to my home. It’s perfect for hidden lighting and pairs well with LED strips. My guests always compliment how stylish the ceiling looks now.
Marcus Thornell –
The wall wash effect from this gypsum channel is incredibly smooth. It produces a gorgeous architectural accent that elevates any room. Installation was easier than expected, and the aluminum is solid and perfectly machined.
Nathan Fairborne –
This molding channel is perfect for hidden ceiling lighting. Once plastered, it looks like part of the architecture, not an add-on. The glow is soft and evenly spread, creating a stunning floating ceiling effect. Very impressive.
Adrian Lockwood –
This gypsum crown molding LED profile is outstanding. It blends seamlessly into the ceiling once plastered, and the wall-wash effect is incredibly smooth. The indirect glow looks luxurious and adds real architectural depth to the room. Excellent quality and precision.
Carson Meldridge –
Fantastic design. The aluminum channel is sturdy and the gypsum edge makes finishing extremely easy for drywall installers. The light diffusion is perfect for creating a soft, elegant ceiling accent. Looks amazing when paired with warm LEDs.
Landon Rivermark –
Top-quality LED profile for crown lighting. The illumination is uniform, the shape is elegant, and once plastered, it looks completely custom. Perfect for premium architectural jobs. Highly recommended.